This allows you to remove the priming assembly on the Frankford Arsenal X-10 Progressive Press for those who want to deprime and swage their brass for trimming and tumbling before the final sizing/loading process. 
 
The X-10 press priming assembly is fully self contained which allows you to remove it with primers still in it and not lose them. The primer assembly also acts as a case guide/rail that holds the case in the shell plate while in the priming station so if you remove it the case has no way of staying in the shell plate.
 
Our primer elimination block acts as a case guide/rail to solve that issue. The block bolts directly in place of the priming assembly using the same 4 cap screws as the priming assembly and is adjustable for different diameter cases. 
 
NOTE: YOU MUST EITHER REMOVE OR PARTIALLY BACK OUT YOUR HOLD DOWN DIE FOR THE PRIMING STATION WHILE USING THIS BLOCK OR YOU WILL DAMAGE THE BLOCK. NO WARRANTY OF BLOCK DAMAGED BY FAILURE TO DO THIS.
 
These are high quality 3D prints designed by Braggin Rights Precision using American made professional grade filament. These are not your typical eBay prints!